INSULATION-RELATED
COATINGS AND ADHESIVES
 
Weather Barrier Breather Mastic Coatings:

WC-1 Polyvinyl Acetate Coating
WC-5 Vinyl Acrylic Coating
WC-7 Vinyl Acrylic Coating
Thick-Kote Vinyl Mastic Coating
WC-1 Fire Retardant
WC-5 Vynal Acrylic Fire Retardant

Condensation Control Coatings

WC-1 Type C
WC-7 Type C
Reinforcing Mesh for Use With Coatings:

Elastafab 894 Modacrylic Reinforcing Cloth
N/A

Vapor Barrier Coatings:

739 BrushSeal™ Water Based Elastomeric
749 Vapor-Blok™ Water Based Elastomeric
Protectokote High Performance Coating

Mold Resistant Coatings:      New!

MAR-T126 EPA Registered Anti Mold Coating


Adhesives:

713 Lagging Adhesive
714 Lagging Adhesive
727 Laminating Adhesive
760 High Temperature Adhesive
795 Duct Liner Adhesive




SHIPYARD-RELATED
PRODUCTS

713 Lagging Adhesive/Coating
714 Lagging Adhesive/Coating
727 Hullboard Laminating Adhesive
749 Vapor-Blok ™ Water Based Vapor Barrier





FIRE-RETARDANT
CABLE COATING
3i Sprayed-on Acrylic Intumescent Coating; for protection of electrical, computer,or signal cables, or other substrates.





NUCLEAR-GRADE PRODUCTS

Vimasco manufactures four products in special versions which are low in chlorides, fluorides, oxidizable sulfur, and other leachable contaminants which can be potential causes of stress corrosion of carbon steel, stainless steel, and other alloys. The intention of these products is to supply the utmost level of safety in insulation systems used on nuclear power facilities where problems arising from stress corrosion of pipes can be critical. These products are manufactured under our highest level of quality control and are fully tested by independent laboratories for compliance with appropriate governmental regulatory guides or military specifications. Full chemical analysis of these products is also available for particular requirements. The products are:

713 NG Lagging Adhesive/Coating
714 NG Lagging Adhesive/Coating
WC-1 NG Weather Barrier Mastic Coating
760 NG High Temperature Adhesive

We do not include the MSDS for these products on our website, these may be obtained by contacting our office at our regular address, phone, fax or the e-mail link shown.





ASBESTOS ABATEMENT
PRODUCTS

22-P and Powerlock Lock-Down Encapsulants

2B Bridging Encapsulant and Lock Down Coating

Earth Kote Three-Part Soil Encapsulant

EPA 55 Asbestos Removal Wetting Agent

These products are available through our sister company, American Coatings Corporation. They may be contacted at (800) 533-0151, or by email at amercoat@bellsouth.net





LOG HOME PRODUCTS

LC- 5 Vinyl Acrylic Chinking
SuperChink™ Premium Acrylic Chinking
SuperCaulk™ Premium Acrylic Caulk
TC-5 Textured Coating